November 18, 2019 - Volume 13 Issue 22 |
|
Featured Sponsor |
|
Inspection Arsenal® Wins Hands-Down! Why Inspect Any Other Way?
Still inspecting using putty, glue or tape or even a 1-piece grid plate? Watch this time study to see firsthand the potential in your inspection process. Faster inspection ensures good parts, while increasing profit right back to the spindle. Deliver perfect parts faster than ever before with Inspection Arsenal® fixturing.
Watch Video
|
|
|
"Rachel's Steel:" High-Strength, Low-Cost Alloy for 3D Printing Parts additively manufactured (AM) with AF-9628, an Air Force steel, are about 20 percent stronger than conventional AM alloys, in terms of ultimate tensile strength, according to research conducted by Capt. Erin Hager, an Air Force Research Laboratory employee and recent graduate of the Air Force Institute of Technology's Aerospace Engineering Program. Full Article |
|
|
Featured Sponsor |
|
Suhner Offers Somex Deep Hole Drills
Automation comes to your production line with Somex brand deep hole drilling units from Suhner. Holes up to 12mm with depths up to 100x the diameter. Fully programmable for automotive and other high-production lines.
Contact:
Lee Coleman --
Suhner Industrial Products
Automation Division Manager
43 Anderson Rd SW
Rome, GA 30161
Phone: 706-235-8046
lee.coleman@suhner.com | www.suhner.com
|
|
|
Featured Sponsor |
|
Kroil Loosens Frozen Metal Parts
Kroil creeps into millionth inch spaces, dissolves rust, and lubricates to loosen frozen metal parts. Kroil's unique, proprietary molecular architecture creates an affinity to metal, which guarantees swift penetration, while maintaining a molecular structure that breaks bonds due to corrosion, contaminants or compression. Kroil has been used by 480 of the Fortune 500 companies since 1939 and is guaranteed to meet your expectations. Available direct in aerosol (Aero Kroil) and bulk.
For a video demo click here / For a trial offer click here
* 1000 E. Thompson Lane * Nashville, TN 37211 * 1-866-465-1029 |
|
|
Featured Sponsor |
|
Machining Without Coolant
Replace messy mist systems and improve dry machining with clean, cold air! EXAIR's Cold Gun Aircoolant System improves tolerances, tool life and production rates by cooling with 20°F air. The Cold Gun is ideal for tool sharpening, drill and cutter grinding, milling, band sawing, more.
Website offers detailed information, video.
|
|