No. 964 is an electrically-heated, 1000°F (~538°C) inert atmosphere oven from Grieve. It is currently being used for bluing steel at a customer's facility.
Workspace dimensions measure 24" W x 24"D x 36"H. 18KW are installed in Incoloy sheathed tubular elements to heat the unit, while a 750 CFM, 3/4-HP recirculating blower motor provides horizontal front-to-rear airflow to the workload.
This Grieve inert atmosphere oven features 8" thick insulated walls comprising 2" of 1900°F block and 6" of 10 lb/cf density rockwool, aluminized steel exterior and Type 304, 2B stainless steel interior with continuously backwelded seams.
Special construction features for inert atmosphere use with the customer's steam boiler include a pressure gauge, internal high-temperature gasket, all-welded expansion connection in doorway throat, air jacket on the inner oven for cooling, 1/2" thick cellular silicone rubber atmosphere door seal, blower shaft seal, positive door latching hardware, adjustable offset door hinges, outlet with pressure relief, all interior seams welded gas-tight and all wall penetrations fitted with compression fittings. An integral oven leg stand is also provided.
Controls on No. 964 include a digital programming temperature controller, manual reset excess temperature controller with separate contactors, recirculating blower airflow safety switch, 10" diameter, 2-pen circular chart temperature recorder, SCR power controller and fused disconnect switch.
Want more information? Click below.