Return to Homepage

New 5-Axis HMC Handles Large Part Roughing to Finishing on One Machine

Doosan Machine Tools America has introduced the DHF 8000, an 800mm twin pallet 5-axis horizontal machining center with a nodding head. This HMC was specifically designed for the processing of large, complex parts such as those used in the aerospace, oil field and automotive industries.

The nodding head spindle and rotary table (axis A and B) allow the DHF 8000 to handle a complete range of machining processes from roughing to finishing in a single setup. This configuration makes quick work of multi-face workpieces and the 5-axis simultaneous machining of complex shapes.

The nodding head spindle rotates through 160 degrees (up/down) and has a maximum speed of 6,000 rpm, with 960Nm (708 ft-lbs) of torque. The Y and Z axis are fitted with dual ball screws to ensure greater structural stability and accuracy, while the column is designed with high static and dynamic rigidity to provide optimum machining performance.

This scaled-up HMC can easily support workpieces weighing up to 4,409 lbs., allowing them to be machined with the same precision as their much smaller counterparts. Its large working area can readily hold parts up to 1400mm (55 in.) diameter.

Other performance and precision enhancing elements include:

"With its robust design, 800mm twin pallets, high-speed, built-in precision and minimum footprint, the DHF 8000 is well-suited to higher end large part applications in aerospace, oil field, automotive and other industries," said Jim Shiner, Director of Sales and Marketing at Doosan Machine Tools America.

Want more information? Click below.

Doosan

Return to Homepage

Copyright © 2017 by Nelson Publishing, Inc. All rights reserved. Reproduction Prohibited.
View our terms of use and privacy policy ::m::