Return to Homepage

New Tool Bends and Cuts 3 Inch Tubes in a Single Step

Schwarze-Robitec has upgraded its cutting tool to combine bending and final cutting for large diameters of up to 3" -- in only one single working step.

To do this, the cutting tool is integrated into the bending tool. This makes the whole process much more efficient and economical. Until now, this was only possible for smaller diameters. The user's benefits are a decrease in scrap material up to 90 percent and reduced production times.

Consequently, the system of the integrated cutting tool is perfectly suited for producing parts in high quantities due to the immense material and time savings. Numerous users in the automotive sector or the supplier industry are already using this system successfully.

To enable these advantages to be used with tube diameters of up to 3", Schwarze-Robitec has optimized the cutting tool. The tools can process these precise cuts in the shortest time possible. At the same time, the material savings have proven to be very high -- up to 100 mm scrap accumulated for each part produced, depending on the bending system used.

Machining of longer pipe units instead of cut-off pipe sections is also possible thanks to the integrated cutting process. This also reduces the time required for loading and unloading the machine.

Direct Processing of All Components

With the new cutting technology, all components receive a clean cutting edge and can be immediately processed further. Therefore, this technology is particularly suitable for series production, for example, in the automotive sector or the supplier industry. This is where the savings of resources and time play an important role.

The controlled chip removal process keeps most of the chips produced during the cutting process away from the machine. A prerequisite for integrating the technology into all-electric machines of the high-performance series is the use of the CNC control NxG. The new controlling system enables the cutting at any bending angle between 0 and 90 degrees and is simply integrated into the bending program. The cutting tool processes all common materials -- including aluminized steels or hard-to-cut materials, such as chrome-nickel steels.

Want more information? Click below.

Schwarze-Robitec

Return to Homepage

Copyright © 2017 by Nelson Publishing, Inc. All rights reserved. Reproduction Prohibited.
View our terms of use and privacy policy ::m::