The TRAUB TNL18 sliding/fixed headstock automatic lathe with seven linear axes now is available with an extra B-axis, expanding its applicability to particularly challenging machining tasks. With the additional B-axis in the upper tool carrier, which can pivot 100 degrees, highly complex parts and complicated contour elements that also require additional operations such as milling, drilling, lateral drilling or l threading may be machined at any angular position by the new TNL18-7B.
Previously, for parallel main spindle operations, angled tool holders were necessary with "normal" turret positioning -- now the turret simply pivots. In addition, the 8-position turret with the double driven tool holder per position capability provides additional flexibility.
Practical user benefits:
Tool Turret Indexing
High-Precision Tool Shanks
The new TNL18-7B also comes with the new TRAUB compact shank system: an improved system for high-precision mounting of tool holders in the turret.
Tool holders are seated deeper in the turret, which results in less leverage effect and, thus, higher stiffness. For live tool holders, the large shank diameter enables insertion of roller bearings with large diameters. A quick-change system permits a high-precision and fast tool change without removing the tool holder. The compact shank system increases tool life and also contributes to improved surface quality.
Simple Changeover Between Fixed and Sliding Headstock Turning
It takes just a few steps to convert the TRAUB lathe from sliding headstock to fixed headstock turning mode and vice versa. The extremely long Z-travel distance of the headstock ensures proper positioning of the main spindle, either for sliding headstock turning or fixed headstock turning. The powerful main spindle is equipped with a C-axis as standard and it delivers high torque in order to achieve large cutting volumes.
The vertical machine bed design results not only in a favorable chip flow but also an extremely compact footprint. This is also made possible by integrating the control cabinet in the upper part of the machine, enabling space-saving integration of the automatic lathe into existing machine groups or cells.
The working area is easily accessed by the operator through its remarkably high and wide sliding door. This provides a lot of room for setup and changeover activities. A generously dimensioned inspection window allows the operator to keep a close eye on the machining process.
Another plus: For servicing, the back cover is quickly removed to allow full access to the mechanical assemblies. The hydraulic and pneumatic components are also arranged with full accessibility to the rear of the machine and can be easily checked at a glance.
The TNL18-7-B is equipped with the TRAUB TX8i-s control, which is based on the CNC control from a worldwide leading control manufacturer, while the user interface software is TRAUB-specific.
The control allows:
Want more information? Click below.